www.alaskaboat.com
Alaska Boats & Permits Brand Logo
907.235.4966
SN186

58 Shore RSW Combo Vessel

$2,000,000

Request More Information

58 Shore RSW Combo Vessel

$2,000,000

Last updated:
11/09/24
Dimensions:
58 x 22-5
RSW:
IMS 50-ton
Status:
See below for Turn-key package pricing
Hull:
Aluminum
Hold Capacity:
150,000 lbs
Year:
1991
Engine:
MTU Series 60
Location:
California
  • Last updated:
    11/09/24
  • Status:
    See below for Turn-key package pricing
  • Year:
    1991
  • Dimensions:
    58 x 22-5
  • Hull:
    Aluminum
  • Engine:
    MTU Series 60
  • RSW:
    IMS 50-ton
  • Hold capacity:
    150,000 lbs
  • Location:
    California

All aluminum Seiner/Combo Vessel designed by John Simpson and built by Shore Manufacturing of Vancouver, BC in 1991. Full Stability and loading report. Ad-measured and brought into the US in 2013, with major modifications for Alaska/West Coast fisheries. Fully equipped for Salmon and Squid Seining, and Tendering.


500HP Detroit/MTU Series 60 Electronic Main (All new injectors, new timing gear, new camshaft and rocker arm assemblies - complete engine tune-up; June 2022). Twin Disc MG-518 gear 4.48:1 ratio with 6" SS Shafting. 24" Bow thruster. 16" Stern thruster (new 2022). 2-station helm with MTU electronic Controls and Wagner/Accusteer power steering. ComNav 2001 Autopilot system with Sat Compass and Port/Star Remotes. 8 kt Cruise at 8 GPM fully loaded. 65 kW John Deere and 21 kW Isuzu Gen sets, all new in 2013. IMS 50-ton RSW system, circ pumps/plumbing all new in 2013; new 6" x 5" circ pump in 2022/2023. All new batteries for the main, inverter system and auxiliaries in 2022/2023. New bottom paint and boot stripe in 2022/2023.


Packs approximately 150,000 lbs in (4) fully insulated and fiberglassed fishholds; holds completely redone in 2022/2023 with extensive foam and fiberglass modifications and new SS punch plate. Complete tender pump package available: Transvac pump, sorting table, weigh box, dewatering, etc.


Major Modifications in 2015 - George Rodden Designed 60" Bulbous Bow; 7' x 7' "Whale Tail" under prop; and 24' wide by 30' long rolling chocks. "Maxituff False Decking over entire deck.


(2) separate 250 hp GM Auxiliary diesels driving triple Vickers hydraulic pumps, off Twin disc PTO's - 120 GPM Hydraulics per engine. Fully redundant system. 800 gallon Hydraulic tank with keel cooler. Puget Sound Hydraulics complete SS hydraulic tubing system with Valvoil valves.


32" Marco Block with swivel and Gripper wheel; Pilkington Drum Style deck winch, Pilkington Purse Davits. AM Services 37' long x 8" diameter main Boom with 3" bore Cylinder slider; Pullmaster M8 Cargo and Tip winches; M8 Topping winch; 2nd PL-4 Cargo winch. (2) AM Services 6" Picking booms with (2) each PL-4 Picking winches. Stainless skiff roller on stern to facilitate loading/offloading skiff - all new 2013/15.


Complete electronics, including: Furuno CH-250 Sonar, Furuno "TZ Touch" Professional Plotter with integrated FCV-1100 Sounder; Furuno 6 kW Radar: (2) Dell Computers with Nobeltec Charting software; Multiple VHF's; Sat Phone; Engine Room/ Deck Camera system. ComNav Sat Compass and Autopilot.


(4) Wide Light Sodiums - Complete Metal Halide "Squid Lights", multiple LED Deck Lights.


Completely rebuilt Captain's Stateroom (2020) with full mattress, vanity and sink: New Samsung 42" wide refrigerator/freezer; GE 42" wide Ceramic top range; Panasonic microwave; double SS sink; Bosch Washer/Dryer. 60" Samsung Flat screen TV; Foscle with (6) bunks; Day bunk in wheelhouse. Complete shower, fresh water head, sink. All new settee cushions, and re-upholstered helm chairs, June 2022.  


5,800 gal diesel in (5) tanks; 1,200 gal water in (2) tanks; Fill Rite 35 GPM diesel pump with 75' hose.


Pilkington Anchor winch (new 2015) with 1" Chain, 3/4" Cable and 750# Navy Anchor. (new 2019)


PRICING:


Vessel Only - $2,000,000


21' x 12' Alfab seine skiff. John Deere 350 hp diesel w/2,500 hrs.

$125,000


250 fm Salmon seine - Completely rebuilt by Jack and Joe, spring 2022 - 375MD with 12# LL and 20# ends, Spectra bunt with splitter, conventional purse.

$35,000


California Squid seine - All new web and completely re-hung, Fall 2020 by Jack and Joe-; #24 bunt, special cowboy line setup; Spectra corkline on ends; heavily corked: all 1.5" web, 16# leads throughout, awesome squid seine!

$85,000


Complete Squid pumping, dewatering, hatch combings, Marco submersible pump, all hoses, clamps, hydraulics.

$30,000


WILL SELL THE TURN KEY PACKAGE LISTED ABOVE for $2,250,000


ALSO AVAILABLE:


87 Ton California Squid permit - Permit lease or owner-finance terms possible.


Complete Salmon Tendering Package - Transvac Fish Pump, with all hoses, fittings, electrical etc; weigh box, sorting table, dewatering box, etc, etc.

$50,000


2022 Marine survey available upon request.

Share this vessel:

Alaska Boats & Permits, Inc., as broker, offers the details of each vessel listed based upon information provided to us by sellers. Alaska Boats & Permits, Inc. cannot guarantee the accuracy of this information and makes no warranties as to the condition of the vessels, gear or equipment.

Sell your IFQ, permit, or boat.

List with us